We offer a wide range of Engineering Raw Materials that are used in various industrial applications. Manufactured using quality material, these products can be custom-made as per the specific requirement of our clients. Known for their dimensional accuracy and resistance to abrasion and corrosion resistance, we offer these products at market leading prices.
Nylon GF Natural
Polyamide 6, 30% glass fibre, for injection moulding.
Typical properties condition standard unit value
Physical
Density
ISO 1183 [g/cm ] 1. 36
Mould shrinkage
ISO 2577 [%] 0. 3 ÷ 0. 5
Water absorption t=23°c / sat. Iso 62 [%] 6
Mechanical
Tensile modulus 1 mm/min iso 527 [mpa] 9500
Tensile strain at break 5 mm/min iso 527 [%] 3. 5
Tensile stress at break 5 mm/min iso 527 [mpa] 175
Izod impact notched +23 °c iso 180/1a [kj/m ] 10
Hardness rockwell
ISO 2039/2 [scaler] 122
Thermal
Melting point
INT. Met. Dsc [°c] 220 ± 2
Heat distortion temperature 0. 45 mpa iso 75 [°c] 220
Heat distortion temperature 1. 80 mpa iso 75 [°c] 200
Softening point vicat 50°c/h - 50n iso 306 [°c] 215
Electrical
Volume resistivity
IEC93 [ cm] 10
Surface resistivity
IEC93 [ ] 10
Comparative tracking index solution a iec 112 [v] 500
Flammability
Flammability 0. 8 mm ul 94 [class] hb
Glow wire test 1 ÷ 3 mm c. E. I. 695-2-1 [°c] -
Test run at 23°c if not differently specified, dam state (dry as moulded).
All data are subject to the producer’s disclaimer. The values in this data sheet have to be considered typical of our standard
Production but not binding for the application of the moulded part.
